|
The ESS is a high power Constant Voltage, Constant Current Programmable DC power supply. Since its introduction in 1995, the ESS has evolved into …
|
Reconstrudio
Solicitar información
|
|
TDK LAMBDA DC POWER SUPPLY
60V 85A
|
Reconstrudio
Solicitar información
|
|
|
Reconstrudio
Solicitar información
|
|
0-150 Volts
0-22 Amps
|
Reconstrudio
Solicitar información
|
|
The EMS series are high power switch mode AC to DC power supplies for applications where high efficiency precise regulation and a high degree …
|
Reconstrudio
Solicitar información
|
|
Features:
Input transient Protection
Meets Worldwide EMI Requirements
Meets Worldwide Safety Requirements
MIL-STD-810E Vibration/Shock
Auxiliary Monitoring Signals
Wide Range Output Voltage
5 Year Warranty
Single Wire Current Share
SE -- Ruggized 115VAC Input …
|
Reconstrudio
Solicitar información
|
|
TDK GEN H600-1.3Also branded as TDK. 600 volts, 1.3 amps, with 780 watts. RS-232/RS-485 interface included as standard.
|
Reconstrudio
Solicitar información
|
|
The LP521FM Power Supply is rated 0 to 20 V @ 3.3 A.
0.01% regulation
Constant voltage/constant current limited
|
Reconstrudio
Solicitar información
|
|
|
The LK343AFM Power Supply is for automatic test equipment, systems, and general purpose laboratory use. Some outstanding features include: convection-cooled, regulation 0.015% or 1 mV-line …
|
Reconstrudio
Solicitar información
|
|
DC regulated High Power Supply with an output of 60 Volts and up to 500 Amps.
Please see the data sheet for more information.
|
Reconstrudio
Solicitar información
|
|
Regulated Power Supply 10V/10A
|
Reconstrudio
Solicitar información
|
|
Dual Regulated Power Supply 40V/1A
|
Reconstrudio
Solicitar información
|
|
|
Power Supply
|
Reconstrudio
Solicitar información
|
|
|
The LH125AFM Power Supply is rated 0 to 40 V @ 0 to 3 A.
|
Reconstrudio
Solicitar información
|
|
|
The LP531FM Power Supply is rated 0 to 20 V @ 5.7 A.
0.01% regulation
Constant voltage/constant current limited
|
Reconstrudio
Solicitar información
|
|
|
Reconstrudio
Solicitar información
|
|
DC Power Supply 0- 60 Volts / 0- 4 Amps
|
Reconstrudio
Solicitar información
|
|
Also sold and branded as TDK
0 - 100 Volts with 0 - 33 AmpsPlease see datasheet for details
|
Reconstrudio
Solicitar información
|
|
Mechanical VNA calibration kit with a DC to 18GHz frequency range.Please see data sheet for more information.
|
Nuevo
Solicitar información
|
|
Three phase high power DC power supply with an output voltage of 20 kW. Please see the data sheet for more information.
|
Reconstrudio
Solicitar información
|
|
80 VOLTS 600 AMPSPlease see datasheet for more informationAlso sold and branded as TDK
|
Reconstrudio
Solicitar información
|
|
Description
This 1500 W lab power supply sets new standards. They are currently the most powerful 1 HU lab power supplies on the market. Another advantage …
|
Reconstrudio
Solicitar información
|
|
Lambda/TDK ZUP3624 Programmable CVCC 800W, 36V / 24A
Features
Constant Voltage/Constant Current
Built-in RS232 & RS485 Interface
An embedded Microprocessor controller
Digital …
|
Reconstrudio
Solicitar información
|
|
|
Reconstrudio
Solicitar información
|
|
Power Supplies, 0 to 60V, 0 to 2.4A.
|
Reconstrudio
Solicitar información
|
|
|
Small and light, the LT803 Power Supply allows an engineer to reduce the overall test bed by 50% when high power is a requirement. Rated …
|
Reconstrudio
Solicitar información
|
|
|
The LP532FM Power Supply is rated 0 to 40 V @ 3 A.
0.01% regulation
Constant voltage/constant current limited
|
Reconstrudio
Solicitar información
|
|
|
The LK341A Power Supply is rated 0 to 20 V at 15 A.
0.015% regulation
Metered
Constant voltage/constant current
Overvoltage protection
|
Reconstrudio
Solicitar información
|
|
|
The LP530FMW Power Supply is rated 0-10 V @ 10 Amp.
0.01% regulation
Constant voltage/constant current limited
220 V Input
|
Reconstrudio
Solicitar información
|
|
The LQ531 Power Supply provides 0 to 20 V @ 8.6 A with 0.005% regulation. It features:
Digital metering
CV/CC
|
Reconstrudio
Solicitar información
|
