By design, the family of PiMPro Precision Passive Intermod Analyzers provide precise measurement of the 3rd, 5th, 7th and 9th order of intermodulation of any system or component under high-power conditions. In addition to passive intermodulation measurements, the units will provide VSWR and Return Loss values. PiMPro Analyzers can be used to verify the integrity of individual passive components including connectors, cable assemblies, antennas, filters, making them an integral performance tool in the field and in the lab.
PiMPro’s main measurement screen provides instantaneous PIM measurement in both dBc or dBm. The large display flashes to annunciate the presence of RF power at the output connector. Pass/Marginal/Fail Limits, Output Power, Frequency and IM settings originate from this screen. PiMPro’s unique Return Loss diagnostic feature at high transmit (TX) power, quickly points out open cables.
Features:
Frequency Band PCS 1900 and AWS 2100
Receive Range 1850 - 1910 and 1710-1755 MHz
Transmit Range 1930-1990 and 2110-2155 MHz
Measures 3rd, 5th, 7th and 9th reflected passive intermodulation of transmission lines, connectors, filters and combiners, jumpers, splitters, tower mounted devices, other passive system components
Alarms Audio & Visual Display
Residual Intermod Level -122 dBm ( -165 dBc at 20 Watts and -168 dBc at 40 Watts)
Receiver Noise Floor -136 dBm
Display Type 7" TFT Color Touch Screen
Data Storage USB Port and Internal Memory, supports HTML and PDF file format
Measurement Modes PIM and Return Loss, Frequency Sweep, PIM vs Time and RX Interference
Power Requirement 90-256 V, 50-60 Hz
Test Port 2 variable signals adjustable from 33-46 dBm (40 Watts)
Output Accuracy ± 0.2 dB
PIM Measurement Accuracy ± 2.0 dB
Directivity > 25 dB
Software Controls Via touch screen display; measurement mode, set-up, test time
Waterproof Enclosure IP67 rated for ingress, dust and immersion. Meets airline carry-on regulations.
Certified ASTM D4169 Rain / Vibration / Drop Test MIL-STD-810F Immersion
