The Electrocorder range is designed to allow users to monitor single, two or
three channels.
Setting up the Electrocorder DC-3V is easy, suitable for semi-technical
staff. Using the supplied (free) Windows software, Electrosoft; the location’s
details are input to the unit’s memory and stored. Electrosoft will then print
documentation allowing users to record and/or pass on delivery instructions
to colleagues. All data is also stored in a database of dispatches and returns,
which tracks the whereabouts of all units.
Why is the Electrocorder better than other similarly priced competitors?
The Electrocorder range use a constant sampling technique, unlike the
single reading of competitors. When the loggers start to record, they sample
every channel 16 times per cycle, a cycle is 16ms at 60Hz and 20ms at
50Hz. At the end of each averaging period, 3 quantities are saved for each
channel, the True RMS average, the Max, which is the highest cycle value
during the period and the Min, lowest cycle value. This means that it will
record all the peaks and troughs which are one cycle or longer.
When recording the Electrocorder will store the average voltage and current
over the period chosen (1 sec to 60 min), it will also record the highest
(max) & lowest (min) cycle values during that period.
Voltage Range Options:
DC-3V-SY= 60V
DC-3V-TD = 300V
Environmentall Sealing Options:
DC-3V-xx-IP43
DC-3V-xx-IP65
Electrocorder DC-3V-IP43-KIT - The product KIT is supplied with four voltage input leads, a carry case, USB lead, Electrosoft and a 12Vdc PSU. (Fused voltage input leads come with the 300V data logger.)
- Fabricantes: ELECTROCORDER
- Modelo: DC-3V-TD-IP65-KIT
