Electrocorder EC-3CT ( 300A) Three Phase Current Logger
Order code SY (60A) or TD (300A)model:
EC-3CT-SY-5H-IP43-KIT (50Hz)
EC-3CT-SY-6Z-IP43-KIT (60Hz)
EC-3CT-TD-5H-IP43-KIT (50Hz)
EC-3CT-TD-6Z-IP43-KIT (60Hz)
The EC-3CT is used mainly by facilities management, contractors, electrical/site services and maintenance engineers to monitor loading variations on site helping them to diagnose any load related issues. Also used for UPS sizing and monitoring and standby generator sizing and monitoring. Perfect for gathering data to make a case for splitting-up the loading or increasing feeder or transformer capacity. The EC-3CT uses traditional clamp-on current transformers (CT's) and has a maximum input of 400A per channel, making it accurate at lower currents, suitable for domestic and light commercial logging. The CTs fit around cables of diameter 30mm (1.2") or less.
Designed to be accurate at current levels from 0.5A to 400A (model dependent), to allow monitoring of light commercial, small industrial, farms and domestic/residential loads, actual kW ratings below depend on the system voltage.
For larger loads, we recommend the EC-3A range which are designed for currents over 300A and larger cable diameters (up to 140mm, 14cm, 6inch). For an even higher current range between 400A and 3kA we recommend the EC-7VAR.
The advantage of the Electrocorder products over most others is that our data loggers constantly sample information (recording the Min, Max and Average) over the set period, many other products only take 'snap shots' of what is going on and can miss 99.9% of the data that is critical to your analysis.
